Package Contents
P3AM-3062-03EN
Fujitsu would like to thank you for purchasing the ETERNUS DX60/DX80 Disk storage system (hereinafter referred to as
"ETERNUS DX60/DX80") and related options.
Use this document to check the contents of your ETERNUS DX60/DX80 and options packages shipment. If any items are found to
be missing, please contact your sales representative for help.
Third Edition
October 2009
Checking the package contents for missing items
Check the contents of the ETERNUS DX60/DX80 and options packages shipment against the following list to con-
firm that there are no missing items.
•
Store the package contents in a safe and secure location, as they may be needed again when making changes to the system
or reinstalling the software.
• Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation.
❏ ETERNUS DX60 and DX80 Base Unit Fibre Channel dual controller model
(ET06F22AU, ET08E22AU, ET08F22AU)
❏ ETERNUS DX60 and DX80 Base Unit Fibre Channel single controller model
(ET06F12AU, ET08E12AU, ET08F12AU)
❏ ETERNUS DX60 and DX80 Base Unit iSCSI dual controller model (ET06L22AU, ET08L22AU)
❏ ETERNUS DX60 and DX80 Base Unit iSCSI single controller model (ET06L12AU, ET08L12AU)
❑ Controller Enclosure (x 1)
❑ Front cover (x 1)
❑ Rack mount kit (*1) (x 1 set)
❑ AC200V cables (x 2)
IEC320-C13 ↔ NEMA L6-15P (4m)
❑ Wrist strap (x 1)
❑ Setup Guide (Fibre Channel model) (x 1)
❑ Safety Precautions (x 1)
❑ Package Contents (this manual) (x 1)
❑ User Guide (Document CD) (x 1)
❑ Network Settings sticker (x 1)
❑ DE_No.Label (x 1)
❑ Pin (x 1)
Used to adjust the Controller Enclosure's AUTO
POWER dip-switch
❑ Guide of Initial User Accounts for
Fujitsu Support Engineers (x 1)
❑ Controller Enclosure (x 1)
❑ Front cover (x 1)
❑ Rack mount kit (*1) (x 1 set)
❑ AC200V cables (x 2)
IEC320-C13 ↔ NEMA L6-15P (4m)
❑ Wrist strap (x 1)
❑ Setup Guide (iSCSI model) (x 1)
❑ Safety Precautions (x 1)
❑ Package Contents (this manual) (x 1)
❑ User Guide (Document CD) (x 1)
❑ Network Settings sticker (x 1)
❑ DE_No.Label (x 1)
❑ Pin (x 1)
Used to adjust the Controller Enclosure's AUTO
POWER dip-switch
❑ Guide of Initial User Accounts for
Fujitsu Support Engineers (x 1)
Disk storage system
To Next Page
Need help?
General