7
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2013 FUJITSU LIMITED
P3AM-4872-11EN
An installation space and network environment must be prepared in advance.
Prepare the following manuals:
●
Documentation CD
●
Related manuals, such as manuals for the server or the networking equipment that is used
Setup Procedures
Installation Space
-Site Planning- "2.5 Outlet/Socket Specifications"
Network Environment
●
-Installation- "1.1 Connection Preparation"
●
-Installation- "1.2 Setup Preparation"
●
ETERNUS Web GUI User’s Guide
Preparation
STEP
●
-Site Planning- "2.1 Installation Specifications"
●
-Site Planning- "2.4 Installation Environment"
Installation space
Check that the installation area meets the space requirements of the rack in which the ETERNUS DX Disk storage
system is to be installed.
Environmental considerations for installation
Check if the installation area for the ETERNUS DX Disk storage system meets the environmental conditions and
installation environment conditions.
Power outlets
Check the type and the number of power outlets/sockets that are required to install the ETERNUS DX Disk storage
system.
Completing and attaching the Network Settings label
Write down the following information on the Network Settings label and attach it to the controller enclosure.
●
IP address and subnet mask for the ETERNUS DX Disk storage system
●
IP address for maintenance work
Settings for the PC
●
Setup Network Environment
ƪ
IP address : 192.168.1.2
ƪ
Subnet mask : 255.255.255.0
●
Set the Web browser
Refer to "ETERNUS Web GUI User’s Guide" for details on the settings that are required.
To Next Page
Loading...
