EasyManua.ls Logo

Fujitsu ETERNUS DX8700 S3 - Figure 25 Example of a Power Supply Connection When a Power Distribution Unit Is Not Used

Fujitsu ETERNUS DX8700 S3
81 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For Direct (No Power Distribution Unit) Connections
The following diagram shows a power supply connection example when no power distribution units are used.
Figure 25 Example of a Power Supply Connection When a Power Distribution Unit Is Not Used
Line 0 Line 1
CP CP
Drive enclosure
Controller
enclosur
e
ETERNUS DX
PSU
Frontend
enclosur
e
Distribution board
Distribution board
↑ To power supply facility
↓ To power supply facility
PSUPSUPSU
PSUPSUPSUPSU
PSU: Power Supply Unit
CP: Circuit Protector
Only connect the ETERNUS DX
to circuit protectors.
1. ETERNUS DX Installation
Outlet/Socket Specifications
46
FUJITSU Storage ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Hybrid Storage Systems
Site Planning Guide
Copyright 2020 FUJITSU LIMITED
P3AM-9422-13ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS DX8700 S3

Related product manuals