2
● 21
■ Cleaning the Pick Arm Rollers
Pull the ADF lever to open the
ADF.
Moisten a cotton swab or Dry
cloth with F1 or F2 Cleaner.
Wipe the small Plastic rollers at
the tip of the Pick Arm.
Wipe the small Plastic rollers and
the Pick Arm with a clean, dry
cloth to dry them.
NOTE
When non-carbon paper is used, the Pick Arm rollers may become dirty with a black substance. Use
Cleaner F2 to remove the contamination.
CAUTION
1. Don’t wipe the pad rubbers with the F2 cleaner.
2. Don’t apply the F2 cleaner to the pad rubber.
Plastic rollers Pick Arm
!
"
To Next Page
Loading...
