Fujitsu fi-5900C Replacement Procedure

-5900C Consumable ReplaCement and Cleaning instRuCtions
ReplaCing the sepaRation RolleRs (Cont.)
• Remove the two Separation
Rollers by sliding them
inwards and off the shafts (in
the direction of the arrow).
• Close the Roller Cover.
Note:
The Separation Rollers will
automatically spring to their
proper position.
• Close the ADF Cover.
• Reset the Separator Roller
Counter in the Software
Operation Panel.
• Install the Separation Rollers by sliding them on to each shaft,
aligning the groove on the roller with the screw on the shaft.
Screw
Groove
Separation
Rollers
Roller
Cover

Fujitsu fi-5900C Specifications

General

Brand	Fujitsu
Model	fi-5900C
Category	Scanner
Language	English