What to do if my Fujitsu FI-5530C2 Scanner will not turn on?
First, push the power button. If that doesn't work, ensure the AC cable and adapter are correctly connected. Try disconnecting and reconnecting them. If the scanner still doesn't power on after Windows starts up, push the power button again.
Why is my Fujitsu FI-5530C2 not starting the scanning process?
Make sure the document is correctly loaded on the ADF paper chute and that the ADF is completely closed. Verify the cable is correctly connected, especially if using a USB hub (check the hub's power supply). Also, ensure the SCSI ID is correctly set using the SCSI ID switch on the rear of the scanner. Turn off and on the power button.
Why do multi-feed errors occur frequently on my Fujitsu Scanner?
Reduce the number of sheets in the document stack to 10 mm thickness or less. Fan the documents before scanning, and correctly align the document stack before loading them on the ADF paper chute.
Advises against damaging AC cables, placing objects on them, or using damaged ones.
Explains how to power on the scanner and its status indicators.
Guides on how to load documents into the Automatic Document Feeder (ADF).
Explains the use of FUJITSU TWAIN 32 and FUJITSU ISIS scanner drivers.
Provides flowcharts to diagnose and fix common scanning problems.
General| Film scanning | No |
|---|---|
| Color scanning | Yes |
| Grayscale levels | 256 |
| Input color depth | - bit |
| Maximum scan size | 297.18 x 431.8 mm |
| Scanner type | Sheet-fed scanner |
| Sensor type | CCD |
| Internal memory | 64 MB |
| Maximum duty cycle | 120000 pages per month |
| ISO A-series sizes (A0...A9) | A4 |
| Auto document feeder (ADF) input capacity | 100 sheets |
| Bundled software | Kofax VRS Professional, ScandAll Pro, Adobe Acrobat Standard |
| Compatible operating systems | Microsoft Windows 2000 Professional / Microsoft Windows XP / Microsoft Windows Server 2003 / Microsoft Windows Vista |
| Minimum scan size | 2.1 x 2.9\ |
| Power requirements | 100-240 VAC, 50/60 Hz |
| Maximum scan area (ADF) (imperial) | 11.7 x 17 \ |
| Minimum scan area (Auto Document Feeder) | 2.1 x 2.9 \ |
| Sustainability certificates | ENERGY STAR |
| Power consumption (standby) | 12 W |
| Power consumption (typical) | 57 W |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 228.6 mm |
|---|---|
| Width | 406.4 mm |
| Height | 292.1 mm |
| Weight | 8482.17 g |
To Next Page