46
2.1 Scanning Double-Sided Documents
1. Place the document on the ADF paper chute.
For details on how to place documents, refer to "1.2 Placing Documents on the ADF" on
page 6.
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [Fujitsu
ScandAll PRO] in the order presented. Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the scanner driver’s setup dialog box, refer to section
"1.5 How to Use ScandAll PRO" on page 29.
4. Select [Duplex] under [Scan Type].
5. Click the [OK] button.
⇒ Changes made on this dialog box are saved and the setup dialog box of FUJITSU
TWAIN 32 closes.
6. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, refer to section "1.5 How to Use ScandAll
PRO" on page 29.
⇒ Scanned document images are displayed in the ScandAll PRO window.
To Next Page
Loading...
