Fujitsu FI-5530C2 - APPENDIX A Using the [Scan] or [Send To] Button

fi-5530C2 Image Scanner Operator’s Guide AP-1
A
APPENDIX A
Using the [Scan] or [Send to] Button
By linking software applications to the [Scan] or [Send to] button, you can launch the linked
application at a press of a button.
(To use ScandAll PRO, read section 2.14 "Scanning by Pressing the Scan Button on the Scanner"
on page 84.)
■ Settings to Configure on the Computer
1. Select [Start]-[Control Panel].
2. Select [Scanners and Cameras]-[Properties].
3. Display the [fi-5530C2dj Properties] dialog box.
In Windows XP or Windows Server 2003, right-click on the [fi-5530C2dj] icon, and then
select [Properties]. In Windows 2000 or Windows Vista, double-click on the [fi-5530C2dj]
icon.
4. Select the [Events] tab.
5. Select an event.
When the operating system you are using is Windows XP, select an event for starting up any
application from the [Select an event] menu.