What to do if Fujitsu fi-5120C is not scanning?
If scanning does not start, try these steps: Realign and reload the documents on the ADF paper chute, and ensure the ADF is completely closed. Check the cable connection (and the USB hub's power if one is in use). If the Function Number display shows an alarm or error, consult the fi-5120C/fi-5220C Operator’s Guide for troubleshooting. You can also try turning the power off and on again.
How to turn on Fujitsu Scanner?
First, push the power button to turn the scanner on. Also, ensure that the AC cable and the AC adapter are correctly connected. If the scanner still doesn't power on, disconnect and reconnect the AC cable and adapter. Make sure you are using the AC adapter and cable supplied with your scanner.
Why does my Fujitsu fi-5120C Scanner multi feed?
Multi feed issues can occur if the documents do not meet the "Document Quality" and the "Multi feed Detection Conditions". Ensure your documents meet these standards. Also, fan the documents before scanning, correctly align them, and load them onto the ADF paper chute. If the stack of documents is thicker than 5 mm, reduce the number of sheets. Another cause may be a dirty Pad ASSY, so clean it. If the Pad ASSY is worn out, consider replacing it.
What to do if Fujitsu Scanner paper is not fed?
If paper is not feeding, first check that the documents meet the "Document Quality" and "Multi feed Detection Conditions" requirements. A dirty Pick roller can also cause this issue, so clean it. If the Pick roller is worn out, replace it. Finally, make sure there is no dirt or dust in the document feed path.
How to remove vertical lines from Fujitsu fi-5120C Scanner images?
If vertical lines appear in the scanned image, it might be due to dirty glass. Clean the glass as instructed in the Operator's Guide "3. Daily Care".
Why are my Fujitsu fi-5120C Scanner images elongated?
Elongated images can be caused by dirty Feed rollers. Clean the Feed rollers. Also, for Windows 2000 and Windows XP, adjust the scale in the [Device Set] tab within "Scanners and Cameras" in the control panel.
How to improve Fujitsu fi-5120C image quality?
Unsatisfactory image quality can be caused by dirty glass. Clean any dirty locations.
How to fix shadow on Fujitsu Scanner image?
A shadow on the leading edge of the scanned image may be due to dirty Feed rollers. Clean the Feed rollers. You can also adjust the [Sub-scan Setting] within [Scanners and Cameras] in the control panel.
Why is my Fujitsu fi-5120C Scanner image distorted?
If the generated image is shifted or distorted, ensure that the documents are loaded correctly.
General| Scanner Type | Document Scanner |
|---|---|
| Optical Resolution | 600 dpi |
| Duplex Scanning | Yes |
| ADF Capacity | 50 sheets |
| Interface | USB 2.0 |
| Color Depth | 24-bit |
| Grayscale Depth | 8-bit |
| Ultrasonic Double Feed Detection | No |
| Scanning Speed | 25 ppm / 50 ipm |
| Supported Paper Sizes | A4, A5, A6, B5, Letter, Legal |
| Scanning Method | CCD |
| Document Size | 8.5 x 14 in (Legal) |
| Weight | 6.4 lbs |
Covers safety precautions, warning indications, and symbols used in the manual.
Verifies scanner package contents upon opening.
Identifies and describes front parts of the scanner.
Identifies and describes rear parts of the scanner.
Identifies and describes internal parts of the fi-5220C scanner.
Identifies removable parts of the scanner.
Explains the operator panel components and their functions.
Describes the procedure for turning the scanner ON.
Details steps for loading documents into the ADF.
Details steps for loading documents onto the flatbed.
Explains how to start scanning documents using ScandAll 21.
Introduces the FUJITSU TWAIN32 Scanner Driver.
Procedure for scanning double-sided documents using the ADF.
Instructions for scanning books using the fi-5220C flatbed.
Instructions for scanning large documents using the fi-5220C flatbed.
Procedure for scanning documents longer than A4 size.
Guidance for scanning mixed-width documents in the ADF.
Methods for saving scanned images in PDF format.
How to remove a specific color from scanned images.
Settings to automatically skip blank pages during scanning.
Setting up multi-feed detection to prevent feeding errors.
Enabling automatic correction of skewed documents.
Lists cleaning materials and locations for the scanner.
Instructions for cleaning the flatbed area of the fi-5220C.
General guidelines and precautions for cleaning the ADF.
Specifications and replacement cycles for consumables.
Procedure for removing and installing the Pad ASSY.
Procedure for removing and installing the Pick Roller.
Procedure to remove jammed documents from the ADF.
Explains temporary error indications on the operator panel.
Provides solutions for common scanner problems.
Checklist for gathering information before contacting support.
Explains the location and purpose of scanner labels.
Shows the document sizes that can be scanned on the ADF.
Details recommended paper types and precautions for scanning.
Graph showing ADF loading capacity based on paper weight.
Identifies areas on paper where perforations can cause issues.
Conditions for multi-feed detection modes.
Lists the basic technical specifications of the scanner.
Details installation space, weight, power, and environmental requirements.
Provides the external dimensions of the scanner models.
Links applications to scanner buttons for launching.
Selects applications for scanner button events.
To Next Page
