fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
2.5 How to Use the Scanner Driver (10)
1 2 3 4 5 6 7 8 9
10
11 12 13 14 15
2. Configuration Window of FUJITSU ISIS Scanner Driver
Image Mode
Selects a color mode suitable for the purpose from the menu.
Black & White Scans data in binary (black and white). Distinguishes black from white according to
the fixed threshold. This scanning mode is suitable for scanning line drawings and
text documents.
16-level Grayscale
Scans data by 14 shades of gray plus black and white. This mode uses 4 bits per
pixel.
256-level
Grayscale
Scans data by 254 shades of gray plus black and white. This mode uses 8 bits per
pixel. This mode is switable for scanning monochrome photographs.
24-bit Color Scans data as full-colored image using 24 bits per pixel. This mode is suitable for
scanning color photographs.
Image Processing Binary processing is applied to the scanned images This mode is available only
when Image Processing Software Option (separately sold) is installed. Please refer
to the "Userfs Guide of Image Processing Software Option" for details.
Resolution
Specifies the number of pixels (dots) per inch.
Select a fixed resolution from the list or enter any value (from 50 to 600) manually. A higher resolution produces finer
image, but requires much more memory.
1 2 3 4 5 6 7 8 9
10
11 12 13 14 15
All Rights Reserved Copyright 2006-2009 © PFU LIMITED
To Next Page
Loading...
Need help?
General
