What to do if scanned images are skewed when "Allow automatic image deskew" is enabled on Fujitsu ScanSnap fi-5110EOXM?
If scanned images are skewed when "Allow automatic image deskew" is enabled on your Fujitsu Scanner, load the document onto the scanner so that the document skew does not exceed the limit.
What to do if scanned images are not displayed when "Allow automatic blank page removal" is enabled on Fujitsu ScanSnap fi-5110EOXM Scanner?
If scanned images are not displayed on the screen when "Allow automatic blank page removal" is enabled on your Fujitsu Scanner, select [Setting...] - [Scanning] tab and click the [Option...] button. Then clear the "Allow automatic blank page removal" checkbox.
What to do if scanning does not start on my Fujitsu Scanner?
If scanning doesn't start on your Fujitsu Scanner, ensure the USB cable is correctly connected, especially if using a hub (check the hub’s power supply). You can also try disconnecting and reconnecting the AC cable and AC adapter. If the "ScanSnap Manager" icon isn't visible, locate and start "ScanSnap Manager" from the "Applications" - "ScanSnap" folder. As a further step, disconnect and reconnect the AC cable and AC adapter. If using a USB hub, connect the scanner directly to your computer. If problems persist, restart your computer, or uninstall and reinstall ScanSnap Manager. Also, ensure that the "Scan and Save Settings" window is closed, and then restart scanning.
How to turn on a Fujitsu Scanner?
To turn on your Fujitsu Scanner, ensure the AC/USB cable and AC adapter are correctly connected. Try disconnecting and then reconnecting the AC cable and AC adapter. Make sure the paper chute cover is open. If you're using Mac OS X, wait until it has fully started up. Press the [POWER] button for more than 1 second, or press the [POWER] button for more than 1 second and turn on the power manually.
Why does my Fujitsu Scanner have multi-feeds?
Frequent multi-feeds on your Fujitsu Scanner may occur if the pad is dirty, so clean the pad. If that doesn't resolve the issue, replace the Pad ASSY. Also, reduce the number of sheets in the document stack to no more than 0.2" (5mm) thick.
Why is the scanning speed so slow on my Fujitsu ScanSnap fi-5110EOXM Scanner?
If your Fujitsu Scanner's scanning speed is slow, first confirm your computer meets the system requirements. If not, at [Scanning] - [Option...] in the "Scan and Save Settings" window, clear the checkbox of the following to increase the scanning speed: Allow automatic image deskew. If your PC has a USB 2.0 port, connect the scanner to this port. (If using a USB hub, it must also support USB 2.0.)
What to do if paper is not fed in my Fujitsu Scanner?
If paper is not being fed in your Fujitsu Scanner and stops midway, clean the Pick roller. If the problem persists, replace the Pick roller. Also, remove any debris from the document feed path.
How to fix vertical lines in scanned images from Fujitsu Scanner?
To fix vertical lines appearing in scanned images from your Fujitsu Scanner, clean the inside of the ADF.
How to adjust brightness on Fujitsu ScanSnap fi-5110EOXM?
To adjust the brightness on your Fujitsu Scanner, go to [Scanning] - [Option...] in the "Scan and Save Settings" screen and adjust the "Brightness" setting.
Why is the scanned image shifted or distorted on my Fujitsu ScanSnap fi-5110EOXM?
If the scanned image from your Fujitsu Scanner is shifted or distorted, ensure you are loading the document correctly.
Covers the necessary software installation steps for ScanSnap.
Guides through installing Adobe Acrobat and ScanSnap Manager.
Instructions on how to safely remove jammed documents.
A guide to diagnosing and resolving common scanner issues.
Detailed instructions for replacing the Pad ASSY.
Detailed instructions for replacing the Pick Roller.
General| Type | Document Scanner |
|---|---|
| Scanning Method | Sheet-fed |
| Optical Resolution | 600 dpi |
| Interface | USB 2.0 |
| Weight | 2.7 kg (6 lbs) |
| ADF Capacity | 50 sheets |
| Duplex Scanning | Yes |
| Color Depth | 24-bit |
| Grayscale Depth | 8-bit |
| Scanning Technology | Contact Image Sensor (CIS) |
| Maximum Document Size | A4 (8.5" x 14") |
| Supported Paper Sizes | A4, A5, A6, B5, Letter, Legal |
| Document Size | Up to 8.5 x 14 in |
| Supported Operating Systems | Windows XP, Windows Vista, Windows 7, Windows 8, Mac OS X |
To Next Page
