54
■ Skipping blank pages
ScanSnap is able to recognize blank pages and remove them from the output data. When scanning
documents in "Duplex" mode, both sides of the documents are scanned regardless of whether or
not their backsides are printed. Though the backsides of one-sided documents are scanned, they are
recognized as "blank" and automatically removed, so they will not appear in the output data.
To change the setting, follow the procedure below.
Operation
1. Click and hold the ScanSnap icon , and select "Setting" from the menu.
2. Select the [Scanning] tab and click the [Option...] button.
To Next Page
Loading...
