62
■ Merging scanned images into one PDF file
When you scan more than single document, the following window will appear if the scanning is
interrupted by a paper jam or other errors.
In this case, you can continue or abort the scanning using the following procedure.
Operation
To continue scanning:
1. Check the last page scanned in the "Message" window.
2. Load the unscanned pages back onto ADF.
3. Click [Continue scanning] button to restart the scanning.
To quit scanning:
1. Click the [Quit] button.
⇒ The following window appears.
2. Click [Yes] to delete the data that were scanned up to the interruption. Otherwise,
click [No] to save the data that were scanned up to the interruption. (*Click [Cancel] to
return to the previous window.
)
To Next Page
Loading...
