20
3.1 Flow of Operations
This section describes the flow of operations starting with the scanning of documents on ScanSnap
to the saving of scanned images in PDF format.
■ Preparation
Operation
1. Make sure that the AC cable is connected to the scanner.
2. Make sure that the scanner is correctly connected to your computer.
3. Turn on your computer.
⇒ The "ScanSnap Manager" icon appears in the Dock menu when Mac OS is started up.
4. Open the paper chute cover.
HINT
You can connect the scanner to your computer after it is turned on. When the
scanner is already connected to your computer, you do not need to reconnect
it.
Paper chute cover
[POWER] button
Power Light
To Next Page
Loading...
