1.1 Names and Functions of Parts
ScanSnap fi-5110EOXM Operator's Guide 3
Before You Start Using Your Scanner
1
■ Operation Button
■ Rear Side
SCAN
POWER
DUPLEX
COLOR
[SCAN] button
Press this button to start scanning.
[POWER] button
Turns on/off the power supply.
Power lamp
Indicates the scanner status.
Blue; Lighted :Ready
Blue; Blinking :Scanning
Yellow; Lighted :Error
Light off :Power off
Seal (informing you that the installation of the software
has to be performed first)
After installing the software, remove this seal.
USB connector
AC adapter connector
To Next Page
Loading...
