Fujitsu ScanSnap fi-5110EOXM

6.2 Cleaning the Scanner Exterior & Stacker
ScanSnap fi-5110EOXM Operator's Guide 79
Daily Care
6
6.2 Cleaning the Scanner Exterior & Stacker
Clean the scanner exterior and the stacker with a cloth moistened with a small amount of Cleaner
F1 (isopropyl alcohol) or any neutral detergent.
ATTENTION
• Do not use paint thinner or other organic solvents.
• When cleaning, prevent water or moisture from getting inside the scanner.
• Do not use compressed air cause dirt and dust to enter the scanner, which
may result in scanner failure and malfunction.
Cloth
Cleaner F1 or
neutral detergent
Paint thinner