To Next Page
Q
qkimSep 16, 2025
Why is the quality of generated image unsatisfactory on my Fujitsu Scanner?
- PPamela CardenasSep 16, 2025
If the quality of the generated image from your Fujitsu Scanner is unsatisfactory, clean any dirty locations on the scanner.
Why is the quality of generated image unsatisfactory on my Fujitsu Scanner?
If the quality of the generated image from your Fujitsu Scanner is unsatisfactory, clean any dirty locations on the scanner.
What to do if scanning does not start on my Fujitsu Scanner?
If scanning does not start on your Fujitsu Scanner, ensure that: * The document is correctly loaded in the ADF paper chute. * The ADF is completely closed. * The cable is correctly connected (if using a USB hub, check its power supply). If the Function Number Display shows an alarm or error, turn the power off and on again.
How to fix Fujitsu FI-5015C error U0?
To resolve a 'U0' error on your Fujitsu Scanner, confirm that the shipping lock is released.
How to fix Fujitsu FI-5015C Scanner error U9?
To resolve a 'U9' error on your Fujitsu Scanner, turn off the scanner, confirm or connect the ADF cable, and then turn the scanner back on.
Why are the generated images elongated on my Fujitsu Scanner?
If the generated image from your Fujitsu Scanner appears elongated, clean the Pick roller.
How to turn on Fujitsu FI-5015C?
If your Fujitsu Scanner doesn't turn on, try these steps: * Ensure the main switch is on. * Press the power button. * Verify that the AC cable and adapter are correctly connected. * Try disconnecting and reconnecting the AC cable and adapter. If it still doesn't power on, consider contacting your seller or an authorized Fujitsu service provider. * After Windows has completely started, try pressing the power button again.
Why does the generated image shift or is distorted on Fujitsu Scanner?
If the generated image from your Fujitsu Scanner shifts or is distorted, ensure that the documents are loaded correctly.
How to fix vertical lines on Fujitsu Scanner?
If vertical lines appear in the generated image from your Fujitsu Scanner, clean the glass following the provided instructions.
How to prevent multi feed on Fujitsu FI-5015C Scanner?
If you're experiencing frequent multi-feeds with your Fujitsu Scanner, try these solutions: * Scan the document using the flatbed. * Fan the documents before scanning, then correctly align and load them in the ADF paper chute. * Reduce the document stack to 4 mm thickness or less.
Why does my Fujitsu Scanner have vertical lines?
If you're seeing vertical lines in the scanned images from your Fujitsu Scanner, clean the glass according to the instructions in the Operator's Guide "3 Maintenance".
Provides essential safety guidelines for operating and handling the scanner.
Explains the procedure for powering the scanner on and off, including power save mode.
Provides instructions on checking document conditions and loading them into the Automatic Document Feeder.
Details the process for placing and scanning documents using the flatbed scanner.
Outlines the steps for performing a scan using the ScandAll 21 software.
Explains how to configure settings and use the FUJITSU TWAIN32 and ISIS scanner drivers.
Provides step-by-step instructions for removing jammed documents from the ADF.
Explains temporary errors (U-codes) and device alarms (E-codes) with their remedies.
General