Fujitsu FI-5015C - Scanning Documents

18
2.4 Scanning Documents
This section explains how to scan documents using Scandall21 as an example.
1. Load documents on the scanner.
For details about loading documents, refer to "2.2 Loading Documents on ADF" on page 12
or "2.3 Loading Document on Flatbed" on page 16.
2. Start up ScandAll 21.
Select [Start] - [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21].
⇒ This starts up ScandAll 21.
3. Select the scanner to use.
Select [Select Source] from the [Scan] menu.
⇒ The [Select Source] dialog box appears.
Select "FUJITSU fi-5015C" and click the [Select] button.
4. Click the [Scan To View] button on the tool bar.
⇒ The [TWAIN Driver] dialog box (for setting the scan conditions) appears.