How to prevent multi feed on Fujitsu FI-5015C Scanner?
If you're experiencing frequent multi-feeds with your Fujitsu Scanner, try these solutions: * Scan the document using the flatbed. * Fan the documents before scanning, then correctly align and load them in the ADF paper chute. * Reduce the document stack to 4 mm thickness or less.
Why is my Fujitsu FI-5015C image distorted?
If the generated image from your Fujitsu Scanner is shifted or distorted, ensure that you load the documents correctly.
Why does my Fujitsu Scanner have vertical lines?
If you're seeing vertical lines in the scanned images from your Fujitsu Scanner, clean the glass according to the instructions in the Operator's Guide "3 Maintenance".
What to do if paper feed error occurred on Fujitsu FI-5015C?
If a paper feed error occurs on your Fujitsu Scanner: * Remove any jammed documents. * Ensure that the documents meet the paper conditions for scanning.
How to fix ADF error on Fujitsu FI-5015C?
To address an ADF error on your Fujitsu Scanner, turn the scanner off, check and reconnect the ADF cable, then turn the scanner back on.
What to do if paper is not fed on Fujitsu FI-5015C?
If paper is not being fed into your Fujitsu Scanner, or if a paper feed error occurs frequently, try the following: * Scan the documents using the flatbed. * Remove any documents from the flatbed. * Clean the Pick roller.
What to do if scanning does not start on Fujitsu FI-5015C Scanner?
If scanning doesn't start on your Fujitsu Scanner, ensure the document is correctly loaded in the ADF paper chute and that the ADF is completely closed. Check the cable connection, especially if using a USB hub, and verify the hub's power supply.
What to do if Fujitsu FI-5015C Scanner is not scanning?
If the Fujitsu Scanner isn't starting the scanning process, consider the following: * Make sure the document is loaded correctly in the ADF paper chute. * Ensure the ADF is completely closed. * Check the cable connection, especially if using a USB hub; verify the hub's power supply. * Turn the power off and on again. If the alarm persists, contact your place of purchase or an authorized Fujitsu service provider.
How to fix Fujitsu FI-5015C Scanner error U9?
To resolve a 'U9' error on your Fujitsu Scanner, turn off the scanner, confirm or connect the ADF cable, and then turn the scanner back on.
How to fix Fujitsu FI-5015C error U0?
To resolve a 'U0' error on your Fujitsu Scanner, confirm that the shipping lock is released.
Provides essential safety guidelines for operating and handling the scanner.
Explains the procedure for powering the scanner on and off, including power save mode.
Provides instructions on checking document conditions and loading them into the Automatic Document Feeder.
Details the process for placing and scanning documents using the flatbed scanner.
Outlines the steps for performing a scan using the ScandAll 21 software.
Explains how to configure settings and use the FUJITSU TWAIN32 and ISIS scanner drivers.
Provides step-by-step instructions for removing jammed documents from the ADF.
Explains temporary errors (U-codes) and device alarms (E-codes) with their remedies.
To Next Page
General