Fujitsu fi-6800 - Page 6

fi-6800 CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS
6
• Pull the lever on the left side
of the Separator Roller
towards you and remove it
along with the shaft.
• Install the new Separator
Roller by inserting the right
side of the shaft first, then
the left side so that the tab
fits in the groove.
• Push up the lever which is
located on the left side of the
Separator Roller.
• Push up the lever which is
located on the right side of
the Separator Roller.
Tab
Separator Roller
Separator Roller
Separator Roller
Lever
REPLACING THE SEPARATOR ROLLER (CONT.)
Separator Roller
Lever