EasyManua.ls Logo

Fujitsu fi-7180 - User Manual

Fujitsu fi-7180
229 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Explains how to configure settings in the
Software Operation Panel.
Explains about troubleshooting.
Explains how to replace the consumables.
Explains how to clean the scanner.
Explains about various ways of scanning.
Explains how to use the Operator Panel.
Explains about the setting items in the
scanner drivers.
Explains how to load documents on the
scanner.
Explains the names and functions of parts
and basic scanner operation.
fi-7160/fi-7260/fi-7180/fi-7280
Appendix
Glossary
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
P3PC-4292-01ENZ0
Scanner
Overview
How to Use This Manual
Index
Introduction
Operator's Guide
Thank you for purchasing our image scanner.
This manual explains about the basic operations and handling of the scanner.
For information on scanner installation, connection and software installation,
refer to "Getting Started".

Table of Contents

Other manuals for Fujitsu fi-7180

Question and Answer IconNeed help?

Do you have a question about the Fujitsu fi-7180 and is the answer not in the manual?

Fujitsu fi-7180 Specifications

General IconGeneral
BrandFujitsu
Modelfi-7180
CategoryScanner
LanguageEnglish

Summary

Chapter 1 Scanner Overview

1.1 Main Features

Details the key capabilities and features of the scanner.

1.2 Parts and Functions

Identifies and describes the physical components of the scanner.

1.3 Turning the Power ON;OFF

Explains the procedure for powering the scanner on and off.

1.9 Basic Flow of Scanning Operation

Outlines the fundamental steps required to perform a scan.

Chapter 2 How to Load Documents

2.1 Loading Documents in the ADF

Provides instructions on how to correctly place documents in the automatic document feeder.

2.2 Loading Documents on the Flatbed (fi-7260;fi-7280)

Details the procedure for scanning documents using the flatbed scanner.

2.3 Documents for Scanning (ADF)

Specifies the types, sizes, and conditions of documents suitable for ADF scanning.

Chapter 3 Configuring the Scan Settings

3.1 Setup Dialog Box for PaperStream IP Driver

Explains the interface and formats of the scanner driver's setup dialog box.

3.2 Setting Items for PaperStream IP Driver

Describes the various parameters and options available for configuring scan settings.

Chapter 4 How to Use the Operator Panel

4.1 Operator Panel

Details the components, buttons, and indicators of the scanner's operator panel.

4.2 Settings Menu

Explains how to access and use the scanner's settings menu for operational adjustments.

Chapter 5 Various Ways to Scan

5.2 Scanning Documents of Different Types and Sizes

Covers techniques for scanning documents of varying widths, sizes, and types.

Chapter 6 Daily Care

6.1 Cleaning Materials and Locations that Require Cleaning

Lists recommended cleaning supplies and identifies scanner parts needing regular maintenance.

6.3 Cleaning the Inside

Provides detailed instructions for cleaning internal components like the ADF rollers and glass.

Chapter 7 Replacing the Consumables

7.1 Consumables and Replacement Cycles

Identifies scanner consumables and outlines their suggested replacement intervals.

7.2 Replacing the Brake Roller

Details the step-by-step procedure for replacing the brake roller.

7.3 Replacing the Pick Roller

Provides instructions for replacing the pick roller.

Chapter 8 Troubleshooting

8.1 Paper Jam

Explains how to safely remove jammed documents from the scanner's paper path.

8.2 Error Indications on Operator Panel

Describes scanner error codes, their meanings, and operator recovery steps.

8.3 Troubleshooting

Offers solutions for common scanning issues and symptoms.

8.4 Before You Contact the Scanner Service Provider

Lists essential information to gather before requesting technical support or repair.

Chapter 9 Operational Settings

9.1 Starting Up the Software Operation Panel

Guides users on launching and accessing the Software Operation Panel application.

9.3 Configuration Items

Details the various settings and parameters configurable through the Software Operation Panel.

Appendix

A.1 Basic Specification

Provides detailed technical specifications for different scanner models.

A.5 Uninstalling the Software

Offers step-by-step instructions for removing scanner-related software from the computer.

Glossary

Related product manuals