Fujitsu fi-7180 - Cleaning the Flatbed (Fi-7260;Fi-7280); Configuring the; Consumables; Daily Care

Chapter 6 Daily Care
Appendix
Glossary
Introduction
Index
Contents
TOP
117
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Daily Care
Operational
Settings
Cleaning the Flatbed (fi-7260/fi-7280)
The flatbed should be cleaned with a piece of cloth moistened
with Cleaner F1, or a sheet of Cleaning Wipe.
1 Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
7260/fi-7280)" (page 28).
2 Clean the following locations with a cloth moistened with
Cleaner F1 or a sheet of Cleaning Wipe.
3 Wait for the cleaned parts to dry.
4 Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
7260/fi-7280)" (page 28).
ATTENTION
Be careful not to let the cleaner in between the document bed and
the plastic frame.
Plastic frame
Document
bed
Document pad