Fujitsu fi-7180 - Indicator; Consumables; Daily Care; Operator Panel

Chapter 4 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
65
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Configuring the
Scan Settings
Indicator
iMFF Setting
Displays the iMFF setting as follows:
In Manual mode, is displayed at all times.
In Auto mode 1 and Auto mode 2, it displays the number of multifeed patterns memorized (max. of 8 patterns).
For details, refer to "4.2 Settings Menu" (page 66).
Icon Mode
Manual
mode
Auto mode 1
Auto mode 2
Application Number
Displays the application number that you want to launch when you press the [Scan/Enter] button in the [Ready] screen.
For details, refer to "4.3 Function Selection" (page 83).
Information
flashes when there is a message for replacing consumables/cleaning/glass cleaning/regular maintenance.
[Consumables], [Cleaning], [Clean glass!], or [maintenance] also flashes on the second line in the [Ready] screen.
For information regarding appropriate actions to take when flashes, refer to "4.2 Settings Menu" (page 66).
Prioritize Panel Settings
appears when the operator panel settings are prioritized.
For details, refer to "4.2 Settings Menu" (page 66).