EasyManua.ls Logo

Fujitsu GENERAL ASHG18KMTE - Specifications; Indoor Unit

Fujitsu GENERAL ASHG18KMTE
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Specifications
1-1. Indoor unit
Type
Wall mounted
Inverter heat pump
Model name ASHG18KMTE ASHG24KMTE
Power supply 230 V ~ 50 Hz
Power supply intake Outdoor unit
Available voltage range 198—264 V
Capacity
Cooling
Rated
k→ 5.20 7.10
Btu/h 17,700 24,200
Min.—Max.
k→ 0.90—6.00 0.90—8.30
Btu/h 3,100—20,500 3,100—28,300
Heating
Rated
k→ 6.30 8.00
Btu/h 21,500 27,200
Min.—Max.
k→ 0.90—8.70 0.90—10.10
Btu/h 3,100—29,600 3,000—34,400
Input power
Cooling
Rated
k→
1.39 2.08
Min.—Max. 0.09—1.66 0.24—3.15
Heating
Rated 1.56 1.91
Min.—Max. 0.09—2.86 0.14—3.00
Fan
HIGH
37.5 61.6
MED 22.9 26.7
LO→ 13.3 13.3
QUIET 8.2 8.2
Current
Cooling
Rated A
6.1 9.3
Heating 7.0 8.6
EER Cooling
k→/k→
3.74 3.41
COP Heating 4.04 4.19
Sensible capacity Cooling k→ 4.05 5.30
Power factor
Cooling
%
98 98
Heating 98 96
Moisture removal L/h (pints/h) 1.7 (3.0) 2.7 (4.8)
Maximum operating current *1
Cooling
A
9.5 13.5
Heating 13.5 16.0
Fan
Airflow rate
Cooling
HIGH
m
3
/h
980 1,170
MED 810 850
LO→ 640 640
QUIET 510 510
Heating
HIGH 1,020 1,170
MED 850 850
LO→ 640 640
QUIET 510 510
Type × Q'ty Crossflow fan × 1
Motor output 59
Sound pressure level *2
Cooling
HIGH
dB (A)
45 49
MED 40 40
LO→ 35 35
QUIET 29 29
Heating
HIGH 46 49
MED 40 40
LO→ 35 35
QUIET 29 29
Heat exchanger type
Dimensions (H × → × D)
mm
Main1: 210 × 798 × 26.6, Main2: 135 × 798 × 20
Sub1: 84 × 798 × 13.3, Sub2: 84 × 798 × 13.3
Fin pitch
Main1: 1.2, Main2: 1.1
Sub1: 1.4, Sub2: 1.4
Rows × Stages
Main1: 2 × 10, Main2: 2 × 8
Sub1: 1 × 4, Sub2: 1 × 4
Pipe type Copper
Fin type Aluminum
Enclosure
Material Polystyrene
Color
→hite
Approximate color of Munsell N 9.25/
Dimensions
(H × → × D)
Net
mm
280 × 980 × 240
Gross 322 × 1,078 × 346
→eight
Net
kg
13.0
Gross 18
Connection pipe
Size
Liquid
mm (in)
Ø6.35 (Ø1/4)
Gas Ø12.70 (Ø1/2)
Method Flare
Drain hose
Material PP + HDPE
Tip diameter mm Ø13.8 (I.D.), Ø15.8 to Ø16.7 (O.D.)
Operation range
Cooling
°C 18 to 32
%RH 80 or less
Heating °C 16 to 30
Remote control
→ireless remote controller (Option: →ired remote controller, Mobile app*3 [FGLair
])
1-1. Indoor unit - (01-1) - 1. Specifications
GENERAL
INFORMATION
GENERAL
INFORMATION

Table of Contents

Related product manuals