— 13 —
● POWER LED
Illuminated when the printer power is on and off when the printer power is
off. May blink or light in a special mode or in case of failure.
● ERROR LED
Illuminated or blinks when paper is empty or in case of failure.
The interval length of blinking represents the type of error.
● FEED button
Pressing this button once causes the paper to feed one line. The longer the
button is pressed, the more paper is fed.
In case of auto cutter error, press the FEED button after removing the cause
of the error.
POWER LED
FEED button
ERROR LED
Powered USB Interface connector
Cash drawer
kick-out connector
Rear Connectors
Operation Panel
● Powered USB interface connector (Serial, parallel, etc.)
Connects to the interface cable.
● Cash drawer kick-out connector
Connects to the cable from the cash drawer.
See 4.6 Error Indication
To Next Page
Loading...
