— 23 —
44
55
d
D
75
Maximum print area 72
φ102 or less
Printing surface
(Unit: mm)
5.2 Printing Paper
Use the print paper shown in the following table or the paper with equivalent
quality.
Paper Type Product Name
Recommended thermal PD160R, PD190R from Ohji Paper
paper roll HP220AB-1, PB670, PB770 from Mitsubishi Paper
Paper width 80
+0
−1
CAUTION!
DO NOT use the following type of paper roll.
■ Paper with folds.
■ Paper with bent corners.
■ Paper pasted or glued to the core.
■ In-wound paper roll (print side in).
Maximum print area 48
Paper width 58
+0
−1
Core inner diameter d (mm) φ12 φ25.4
Core outer diameter D (mm) φ18 φ32
To Next Page
Loading...
