Troubleshooting and tips
The notebook stops working
NotebookEnergysavingm ode
Cause Troublesho ot ing
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An ap plication programme has
caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
► Ch arge the battery.
or
► Insert a charged battery.
or
► Connect th e mains adapt
er to the
notebook.
The printer does not print
Printerdoe s notp
rint
Cause Troublesho ot ing
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the p rinter).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Ch eck whethe
rthecorrectprinterdriveris
loaded (ref
er to the printer documentation).
The radio connection to a netw ork does not work
Theradi
oconnect i ontoane tworkdoes notwork
Cause Troublesho ot ing
The wireless component is disabled.
► Switch the radio component on (see
"
Switching the wireless components on and
off", Page 42).
The wireless component is enabled. Despite
this, the wireless co nnection to a network does
not work.
► Check whether the radio connection is
switched on via the software.
► Furthe
r information on using the radio
compo
nent can be found in the help files.
66 Fujitsu Technology Solutions
To Next Page
Loading...
