Fujitsu Lifebook AH531 - Chapter 3 User-Installable Features; Lithium ion Battery

41 - Starting Your LIFEBOOK Notebook
Several additional windows will appear, prompting you to enter a name and description for your
computer, an Administrator password, and a domain name. Read the instructions on the screens carefully
and fill in the information as directed. Once you have finished with the setup, it is very important that you
install ClickMe!, as detailed below.
Running ClickMe!
The first time you boot up your system, you will see an icon called Click Me! in the Start menu. It is very
important that you run the ClickMe! utility the first time you boot up in order to ensure that the
necessary applications, utilities. and drivers are installed. When you click the Click Me! icon, your
system will automatically create the related icons in the system tray in the bottom right of the screen.
These icons provide links to utilities that you will frequently access.
When you run the ClickMe! utility, several applications and utilities are installed; this takes time. While
ClickMe! is running, the system may go into Suspend mode. If this should occur, press the
Power/Suspend/Resume button momentarily to wake the system up. Alternately, while ClickMe! is
installing, slide your finger across the touchpad every few minutes to keep the system awake.
Registering your LIFEBOOK with Fujitsu
You can register your notebook by going to our website at: us.fujitsu.com/computers. You will need to
be set up with an Internet Service Provider (ISP) to register online.
BEFORE RUNNING THE CLICKME! UTILITY, BE SURE THE WIRELESS LAN DEVICE IS ENABLED BY
CLICKING THE [FN]+[F5] KEY COMBINATION. WHEN THE WIRELESS IS ENABLED, THE WIRELESS STATUS
I
NDICATOR WILL GLOW.
T
HERE MAY BE SOME THIRD-PARTY APPLICATIONS THAT DO NOT GET INSTALLED USING THE CLICKME!
UTILITY. FOR MORE INFORMATION, REFER TO YOUR GETTING STARTED GUIDE.
ClickMe!