65
- Memory Upgrade Module
Removing a Memory Upgrade Module
1 Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2 Pull the clips sideways away from each side of the memory upgrade module at the same time.
3 While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
notebook. (Figure 32)
4 Store the memory upgrade module in a static guarded sleeve.
5 Replace the cover and reinstall the screws.
Figure 31. Installing memory module Figu
re 32. Removing memory module
Alignment Keys
Retaining Clips
Retaining Clip
Retaining Clip
To Next Page
Loading...
