32
Integrated Wireless LAN User’ s Guide
PPPoE
Point to Point Protocol over Ethernet
A protocol for Ethernet, using a Point-to-Point Protocol
(PPP), which is used for connection on the phone line.
Protocol
Procedures and rules use to send and receive data
between computers.
- Method of sending and receiving data
- Process used to handle communication errors
Conditions required for communication are organized
in procedures for correct transfer of information.
SSID
Service Set Identifier
Specifies which network you are joining. Some systems
allow you to specify any SSID as an option so you can
join any network.
TCP/IP
Transmission Control Protocol/Internet Protocol
A standard Internet protocol that is most widely used.
Wi-Fi Compatible
Wi-Fi (Wireless Fidelity) Identifies that the product has
passed the interoperability test, supplied by the WECA
(Wireless Ethernet Compatibility Alliance), which guar-
antees the interoperability of wireless IEEE 802.11 LAN
products. For more information on the Wi-Fi standard,
go to the WECA website at: www.wirelessethernet.com.
Wireless LAN.book Page 32 Wednesday, November 28, 2001 11:30 AM
To Previous Page
Loading...
Need help?
General
