First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/OFF switch for wireless com ponents: Slide the ON/OFF switch
for wireless components to the ON po sitio n before s witching on t he device.
When you switch o n the device for the first time, the supplied softw are is
installed and configure d. B ecause this procedure m ust not be interrupted,
you should set aside eno ugh time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, D O NOT restart the device unless
you are requested to do so!
To make it easier to use y
our device for the first time, the operating system
is pre-installed on th
e hard disk.
► Switch on your device.
► During installation, follow th e instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help pro grammes, updates, manuals etc.
on the device or on the Internet at "
http://ts.fujitsu.com/support".
18 Fujitsu Technology Solutions
To Next Page
Loading...
