Security functions
Password protection for booting of the operating system
With the supe rvisor password you have set in the BIOS Setup Utility (see
section "
Setting supervisor and user password", Page 57), you can also
prevent booting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utilit y and go to the Security menu.
Operatings ystem
► Select the Password on Boot option and press the Enter key.
► Select the desired option (Disabled, First Boot or E very Boot) and press the Enter key
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. You will be prompt ed to enter your password (th e supervisor password).
Deactivating system protection
► Start the BIOS Setup Utilit y and go to the Security menu.
Operatings ystem
► Select the Password on Boot option and press the Enter key.
► Select the Disabled option and press the Ent er key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is n o longer passw ord-prote cted .
58 Fujitsu Technology Solutions
To Next Page
Loading...
