Removing and installing components
during servicing
Securing the cover
2
1
► Place the cover int
o its installation position in the direction of the arrow (1).
► Secure the cover with the screws (2).
Removing and installing the hard disk
Removing the cover
► Remove the battery (see Chapter "Removing the battery", Page 30).
1
2
► Remove the screw (1).
Keep the screws in a safe place. If you are removing more than one component at
the same time, store the screws for the individual compone nts separately from each
other. If you install the wrong screws, components may b e da maged.
► Lift the cover off the notebook (2).
50 Fujitsu Technology Solutions
To Next Page
Loading...
