Removing and installing components
during servicing
Attaching the cover
2
1
► Place the cover in t
he correct mounting position (1).
Ifyouremovemoret
han one component at the s ame time, keep the screws for the
individual compo
nents sepa rately from each other and make sure that you use the
correct screws. I
f you install the wrong screws, componen ts may be damaged.
► Tighten the screw (2).
► Insert the battery (see Chapter "
Inserting the battery", Page 30).
Removing and installing the optical drive
Removing the op tical drive
► Prepare for
removal, see "
Prep aring to remove compo nents", Pa ge 48.
Harddisk
1
2
► Remove the screw (1).
The drive is released.
► Pull the drive out of the drive bay (2).
52 Fujitsu Technology Solutions
To Next Page
Loading...
