Removing and installing components
during servicing
Installing the optical drive
2
1
► Slide the drive into the notebook (1).
► Tighten the screw (2).
► Complete the removal, see "
Finishing component removal", Page 53.
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "
Inserting the battery", Page 30).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
Fujitsu Technology Solutions 53
To Next Page
Loading...
