Working with the notebook
ExpressCards
SlotExpressCard
AnExpressCardslotallowsanExpressCard/34tobeusedwiththecomputer.
Consult the documentation supplied by the ExpressCard’s manufacturer
and follow the instructions provided.
Never use force when installing or removing an ExpressCard.
Make sure that no foreign objects enter the ExpressCard slot.
Inserting the c ard
Keep the placeholder for the slot in a safe place. When you remove the card again, you
must reinstall the place holder. This prevents foreign objects from get ting into t he slot.
1
2
► Press the edge of the placeholder (1)
to make the card placeholder protrude
from the notebook’s case.
► Pullthecardplac
eholder ou t of the slot (2).
► Insert the car
d into the slot guide with
the connecti
on contacts firs t.
► Gently push the card into the slot until you
feel it click into place. Do not use any force.
Depending o
n the particular t ype used, th e
card may pr
otrude slightly from the slot.
Please see the documentation relating to the card for driver installation instructions.
42 Fujitsu Technology Solutions
To Next Page
Loading...
