Fujitsu LIFEBOOK P770 - Restarting the System; Windows Power Management

56 - Power Management
Enable or Disable the Hibernation Feature
Windows 7:
The Hibernate is enabled by default. To disable or enable the Hibernation feature follow these steps:
1 From the Start menu, select Control Panel, then select the Power Options icon.
2 Select “Choose what the power button does” or “Choose what closing the lid does”, then make your selections
(Do Nothing, Sleep, Hibernate, or Shut Down).
Windows XP:
The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
1 From the Start menu, select Settings, and then select Control Panel.
2 From the Control Panel select Power Options.
3 Select the Hibernate tab. Select the box to enable or disable this feature.
Windows Power Management
The Power Options icon located in the Windows Control Panel allows you to configure some of the
power management settings. For example, you can use the Power Options to set the timeout values for
turning off the display and hard disks whether you are running the notebook on battery power or one of
the adapters.
Restarting the System
If your system is on and you need to restart it, be sure that you use the following procedure.
Windows 7:
1 Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right-hand
pane.
2 Select Restart from the list.