49
Entering the BIOS Setup Utility
To enter BIOS Setup Utility do the following:
1 Turn on or restart your LIFEBOOK notebook.
2 To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open
the main menu of the BIOS Setup Utility with the current settings displayed.
3 Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter
the current settings.
The Boot Menu can also be invoked by pressing the [F12] key when the Fujitsu logo appears on the screen.
Setting the Supervisor Password and Password on Boot Settings
1
Enter the BIOS Setup Utility.
2 Scroll to the Security Tab.
3 Select Set Supervisor Password, press [ENTER].
4 Enter New Password and confirm new password.
5 In the Security Tab, scroll to Password on Boot, and select Every Boot and press [ENTER].
6 Press [F10]. The Save and Exit, a screen will pop up. If you are finished making changes, select Yes and press
[ENTER].
BIOS Guide
A guide to your notebook’s BIOS is available online. Please visit our service and support website at
http://www.computers.us.fujitsu.com/support, then select User’s Guides under Online Support. Select
your Product, Series, and Model, then click [Go]. Under the Manuals tab, select the BIOS Guide.
Booting the System
We strongly recommend that you not attach any external devices and do not put a DVD/CD in your drive
until you have gone through the initial power on sequence.
When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do
nothing the system will load the operating system, and then the Windows Welcome will begin.
To Next Page
Loading...
