78
- Secure Digital (SD) Cards
Installing SD Cards
SD Cards are installed in the SD Card slot (Figure 30). To install a card, follow these simple steps:
1 Make sure there is no card currently in the slot. If there is, see Removing an SD Card.
2 Insert your card into the slot with the product label facing up.
3 Push the card firmly into the slot until it is seated in the connector.
Removing an SD Card
To remove an SD Card, push the card in until it unlatches. It will then eject from the slot for removal.
INSTALLING OR REMOVING AN SD CARD DURING YOUR LIFEBOOK NOTEBOOK’S SHUTDOWN OR
BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR LIFEBOOK NOTEBOOK.
D
O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS
YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR LIFEBOOK NOTEBOOK, OR BOTH.
To Next Page
Loading...
