23
- Locating the Controls and Connectors
Headphone Jack
The headphone jack allows you to connect headphones. See “Headphone Jack” on page 96.
USB 2.0 Ports
The USB 2.0 ports (one on the left side, two on the rear) allow you to connect Universal Serial Bus
devices. USB 2.0 transfers data at up to 480 Mbps and is backward-compatible with USB 1.1 devices,
which transfer data at up to 12 Mbps. See “Universal Serial Bus Ports” on page 94.
PC Card Slot
The PC Card Slot allows you to install a Type I or Type II PC Card. See “PC Cards” on page 85.
PC Card Eject Button
The PC Card eject button is used for removing a PC Card from the slot.
Pen Garage
The pen garage is used to store the pen when not in use.The pen is used as the interface with the active
digitizer display.
Pen Tether Attachment Point
The pen tether attachment point is designed to securely hold a pen tether to prevent loss of the pen. See
“Installing a Pen Tether” on page 50 for additional information.
Smart Card Slot
A dedicated Smart Card slot is provided on your Tablet PC. Smart Cards are the same size and shape as a
credit card, but they contain embedded integrated circuits. See “Smart Card Reader” on page 87. To use
the embedded Smart Card Reader, you must purchase optional third-party software for installation.
To Next Page
Loading...
