Fujitsu LifeBook T901 Series - Locating the Controls and Connectors

7
Getting to Know Your Tablet PC
Locating the Controls and Connectors
Connectors and peripheral interfaces on the
LifeBook T901 Series Tablet PC and the optional
Port Replicator allow you to connect a variety
of devices. Specifi c locations are illustrated in
Figures 2-4 through 2-7. The table below provides
a short description of each icon on the LifeBook
T901 Series Tablet PC. Each of the icons is
either molded into or printed on the Tablet PC
chassis.
Connection Table PC Icon Purpose
DC in Connector Connect an external power source such as the AC adapter or auto/
airline adapter.
SD/Memory Stick
Slot
The Secure Digital (SD) card/Memory Stick slot allows you to install a
fl ash memory card for data storage. Flash memory cards allow you to
transfer data to and from a variety of different digital devices.
Smart Card Slot The dedicated Smart Card slot allows you to install a Smart Card on
which you can store such data as medical information or electronic
“cash”.
USB Port Connect Universal Serial Bus 2.0 or 1.1 compliant devices to the Tablet
PC.
Microphone Jack Connect an external microphone. The internal microphone is disabled
when you plug in an external microphone.
Headphone Jack Connect stereo headphones or powered external speakers. The internal
speaker is disabled when you plug in external headphones or powered
speakers.
Tablet Dock Port Connect the T901 Series Tablet PC Port Replicator or other approved
docking device. Refer to documentation accompanying the docking
device for more information.
Security Lock Slot The security slot allows you to secure the pen tablet PC using
Kensington-compatible locking devices.
Suspend/Resume
Button
The Suspend/Resume button allows you to suspend pen Tablet PC
activity without powering off, resume your pen tablet PC from suspend
mode, and power on the system when it has been shut down from
Windows.
IEEE 1394 DV
Port
This allows you to connect to a multimedia device with IEEE 1394 port
such as a digital video camera.
Local Area The LAN (RJ-45) jack is used to connect the internal Fast Ethernet
(Gigabit Ethernet 1000/100/10Mbps) to a Local Area Network (LAN)
in your offi ce or home, or broadband devices such as a cable modem,
DSL, or satellite internet.
External Video
port
The external video port allows you to connect an external monitor or
LCD projector to your computer.
Wireless LAN On-
Off Switch
The wireless LAN switch allows you to turn power to the optional wireless
LAN device on and off.
Table 2-1 System icons