19
Getting to Know Your Tablet PC
Low battery condition
When the battery is discharged to a very low
level, the battery level indicator on the status
indicator LED / turns red. If it turns
red, connect the AC adapter to your notebook
immediately to recharge the battery.
The use of a weak battery may result in
lost of data you are currently working on.
When the battery runs low, connect the
AC adapter to your notebook as soon
as an external power source is available
or immediately save the data you are
working on, exit all applications and turn
off the notebook.
Accessing data on the hard disk consumes
a lot of power. Therefore when the battery
is weak, connect an AC adapter to the
notebook before accessing data on the
hard disk.
If a battery is weak and there is no system
activity, the notebook may go into standby
(i.e. suspend) mode. However, if there
is system activity, the notebook will go
into standby mode only after the system
activity has completed its processing.
The notebook will go into standby mode
when the indicator reaches 3%. This is
the default setting of the notebook.
To Next Page
Loading...
