54
Shock Sensor Utility
General information
The Shock Sensor Utility is designed to decrease
the risk of damage to the computer’s hard disk
drive (HDD) in the event of excessive impact or
vibration. Additionally, the Shock Sensor Utility
has the ability to improve the security of the
computer by automatically locking the computer
with a password when it is carried. Note that the
HDD protection and computer locking features
are mutually exclusive; both cannot be selected
at the same time.
Setting up the Shock Sensor Utility
1. Double-click the Shock Sensor Utility icon
(
) in the Notifi cation Area at the bottom-
right of the screen. The [Shock Sensor Utility]
window appears.
2. Click the [Setting] button (
). The [Shock
Sensor Utility Settings] window appears.
• Action
Select the action you wish this utility to
perform:
– Protect HDD from impact
HDD head is retracted when an impact
to the computer is detected.
– Lock computer when carried
Lock the computer when it is being
carried.
– Nothing
No action.
• Sensitivity of impact/horizontal move/
fall/carry detection
Adjust the sensitivity of the acceleration
sensor based on system motion or
impact.
• Ignore periodic vibration
If vibration is periodic, disregard it.
• Ignore mouse click
When the mouse is clicked, sensitivity is
temporarily lowered.
To Next Page
Loading...
