Why nothing is heard from the other side during a call using Fujitsu Monitor?
If you can't hear the other party during a call using your Fujitsu Monitor, ensure that the USB headset or USB telephone conference system is set as the primary device for voice calls in Microsoft Lync / Skype for Business. "Fujitsu Call Indicator" must not be selected as the primary device for voice calls.
Why is Fujitsu Monitor screen becoming darker?
The screen of your Fujitsu Monitor may be becoming darker because the background lighting has a limited lifetime. Contact our Service Desk.
What to do if the picture is wrongly adjusted on my Fujitsu P27-8 TS Pro?
If the picture on your Fujitsu Monitor is wrongly adjusted, try running the Factory Recall function. The Auto Processing message will then appear.
Why is my Fujitsu Call Indicator not recognised by the operating system?
If the Fujitsu Call Indicator is not recognized by the operating system, verify that the monitor is connected to the computer using the supplied USB cable and check if Call Indicator is enabled in the OSD menu.
What to do if Fujitsu P27-8 TS Pro picture is wrongly adjusted?
If the picture on your Fujitsu Monitor is wrongly adjusted, try running the Factory Recall function.
Why is Fujitsu Monitor picture position not correct?
If the picture position on your Fujitsu Monitor is not correct, it might be recognizing an undefined mode. Try running the Auto adjust function.
What to do if Fujitsu Monitor picture disturbances appear (horizontal lines, picture noise)?
If you observe horizontal lines or picture noise on your Fujitsu Monitor, try running the Auto adjust function.
What to do if Fujitsu Monitor picture disturbances appear (vertical lines)?
If you are experiencing picture disturbances such as vertical lines on your Fujitsu Monitor, try running the Auto adjust function.
What to do if Fujitsu P27-8 TS Pro Monitor displays 'Frequency out of range' error?
If your Fujitsu Monitor shows a 'Frequency out of range' message, it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software or set a different screen resolution.
What to do if Fujitsu P27-8 TS Pro picture is shaking?
If the picture on your Fujitsu Monitor is shaking, check that the data cable is correctly attached to the monitor port on the computer. You can also try running the Auto adjust function.
Critical guidelines for safe operation and handling of the device.
Initial physical placement and configuration of the monitor.
Procedures for connecting the monitor to power and computer.
Specifics on connecting various data and power cables to the monitor.
Instructions for connecting the monitor to the computer's ports.
Basic procedures for powering the monitor on and off.
Overview of how to adjust various monitor parameters via the OSD menu.
Explains the use of physical buttons and the on-screen display menu.
Adjusting image parameters like phase, clock, and position for optimal picture quality.
Customizing OSD settings such as language, timeout, and rotation.
Accessing and configuring advanced monitor features like presence sensor and DDC/CI.
Choosing the active video input source for the monitor from available ports.
Adjusting the color balance and RGB values for custom display tuning.
Fine-tuning the display's luminance and contrast levels for desired picture quality.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Refresh Rate | 60 Hz |
| Height Adjustment | Yes |
| Swivel | Yes |
| Tilt | Yes |
| Pivot | Yes |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178°/178° |
| VESA Mount | 100 x 100 mm |
| Connectivity | 1 x DisplayPort, 1 x DVI-D, 1 x HDMI, 1 x VGA, 4 x USB 3.0 |
| Speakers | 2 x 2W |
| Color Gamut | 100% sRGB |
| Resolution | 2560 x 1440 (QHD / 1440p) |
To Next Page