To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu Plasmavision P42HTA51E Series and is the answer not in the manual?
General| Screen Size | 42 inches |
|---|---|
| Display Type | Plasma |
| Contrast Ratio | 3000:1 |
| Viewing Angle | 160° (Horizontal), 160° (Vertical) |
| Inputs | Composite, S-Video, Component, VGA |
Lists all included accessories with the display unit.
Instructions on how to attach ferrite cores to cables for signal attenuation.
Identifies and describes the front panel components and controls of the display.
Identifies and describes the rear panel connections and ports.
Details the various input/output terminals and the power switch on the bottom panel.
Identifies all buttons and functions of the remote control unit.
Step-by-step guide for inserting batteries into the remote control.
Safety and handling precautions for the remote control to prevent damage.
Specifies the optimal operating range and angle for the remote control signal.
Wiring diagrams for connecting DVD recorders, players, and satellite tuners.
Wiring diagrams for connecting VCRs and PCs to the display.
Procedures for powering the display on, off, and placing it in standby mode.
How to increase, decrease, or mute the audio volume using the remote or panel.
Steps to tune in and watch terrestrial TV broadcasts, including channel selection.
Instructions for viewing teletext information superimposed on TV programs.
How to select different video input sources like SCART, Component, and HDMI.
Manages on-screen info, picture modes, and saved picture memories.
Controls audio modes for broadcasts and sets the auto power-off timer.
How to change the screen aspect ratio and size for optimal viewing.
Details the available screen size options like Normal, Wide1, Wide2, Zoom1, Zoom2.
Explains the different aspect ratios supported, such as 4:3 and 16:9.
Adjusts picture quality, screen position, and size.
Configures audio settings, input terminals, and advanced features.
Accesses miscellaneous settings including Screen Orbiter and Auto Off.
Adjusts contrast, brightness, color, tint, and sharpness for optimal picture quality.
Selects picture modes and color temperature, stores custom picture settings.
Adjusts the horizontal and vertical placement of the picture on the screen.
Adjusts the width and height of the picture to fit the screen.
Fine-tunes audio settings including treble, bass, balance, and loudness for better sound.
Fine-tune picture settings like Dot Clock, Clock Phase, and Clamp Position.
Configure display information (OSD) and select screen language.
Set input names and configure video/RGB input terminal settings.
Manages channel tuning, auto/manual store, and skip functions.
Configures auto standby based on signal and selects audio input sources.
Utilizes Screen Orbiter, white screen, and background settings to prevent burn-in.
Manages RGB input settings, code settings, and displays system status information.
Covers precautions, screen cleaning, cabinet cleaning, and ventilation grille cleaning.
