Fujitsu Plasmavision P42VCA10 - Adjusting Screen Position and Size (POSITION;SIZE Menu)

E-22
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
Press .
The main menu screen will appear.
Press or to select
“POSITION/SIZE”.
Each time you press or , one of the available
menus appears in the following sequence:
The POSITION/SIZE Menu screen will appear.
Press or to select
“Position”.
Press
.
The “Position” adjustment screen will appear.
Press or to select
“Horizontal” values of screen
position.
Press
or to change
horizontal values.
: Moves screen to the right.
: Moves screen to the left.
Press to store.
Press
when you finish.
* Repeat steps 3 to 7 when you wish to make
changes to other options.
BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN
POSITION
]
“POSITION/SIZE” selected from the main
menu screen
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
“Position” adjustment screen
PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT
1
2
3
4
5
6
7
E-P42VCA10-OV(20-25) 03.1.20, 13:17Page 22 AdobePageMaker6.5J/PPC