Fujitsu PRIMERGY BX900 - Using the PRIMERGY BX900 Management Blade GUI to Set the IP Address

12 of 20 Brocade 5450 Embedded Switch Module QuickStart Guide
Publication Number: 53-1001265-02
Using the PRIMERGY BX900 Management Blade GUI to set the IP address
Refer to the PRIMERGY BX900 Management Blade User Guide for instructions on how to bring up the PRIMERGY
BX900 Management Blade application.
NOTE
It is recommended that you set the IP address using the PRIMERGY BX900 Management Blade ServerView GUI
application because this enables centralized management of the Embedded Switch Module.
Figure 5 shows the PRIMERGY BX900 Management Blade application main screen. Perform the following steps to
modify the Brocade 5450 Embedded Switch Module’s default IP address.
FIGURE 5 PRIMERGY BX900 Management Blade application main screen