1
RX200 S2
1
Checking the items sup-
plied
Check the contents in the package using the
"Contents List". If any items are missing, inform
an ofce listed in the "Contact Information".
B7FH-2951-02EN-00
2
Reading and understand-
ing "Safety Precautions"
Before using this server, be sure to read and un-
derstand the attached "Safety Precautions".
Also check it when connecting, installing internal options
and setting up this server.
When installing internal options, perform operations after
reading the following manuals.
"Chapter 7 Installing Internal Options"
"PRIMERGY Server Books"/
"Supplement"
Install the OS before installing the following options.
Installing the OS after options have been installed will
cause installation operations to end in an error.
- Non-system hard disks
- External SCSI optional devices (Hard disk cabinet, Back-
up cabinet, etc.)
3
Installing internal options
If internal options have been purchased separately, install them before installing the Operating System.
n
Available internal options and
installation locations
After installing internal options, check that the order and
place of installation is correct and cables are correctly at-
tached.
n
PRIMERGY RX200 S2 Manuals
Manuals for this server can be accessed from the section below of the PRIMERGY Document & Tool CD (Disc 2).
[CD-ROM Drive] :\MANUAL\INDEX.PDF
Manuals can be displayed using Acrobat® Reader® or Adobe® Reader®. If using Acrobat® Reader®, use version 4.0 or later.
To Next Page
Need help?
General
