Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Guide

PRIMERGY RX200 S8
System configurator and order-information guide
Contents
4x 2.5" Hot-plug HDD or SSD
8x 2.5" Hot-plug HDD or SDD
Instructions
Configuration diagram
Configurator
0 System software
I Basic unit
II Processor
III Memory
IV Graphics
V Accessible drives
VI Drive Bay for 4x /8x 2.5" HD Basic Unit
VII
Modular Raid 0/1, Raid5 for 4x 2.5" / 8x 2.5" SAS or SATA HD's.
On-board Controller for 4x 2.5" SATA or SAS HD`s
VIII 4x or 8x 2.5" SAS / SATA Hard disk drives
IX External SAS Disk Array, SAS backup drives or SCSI peripheral devices
X Fibre-Channel controller
XI Communication/Network
XII System Management Products (RemoteView)
XIII Miscellaneous
XIV Country specific power cord
Change report
PRIMERGY Server
February 2014

Fujitsu PRIMERGY RX200 S8 Specifications

General

Number of Processors	1 or 2
Chipset	Intel C602
Operating System Support	Windows Server, Linux, VMware
Form Factor	Rack-mountable
Processor	Intel Xeon E5-2600 v2
Memory	Up to 768 GB
RAID Support	RAID 0, 1, 5, 6, 10
Storage	Up to 8 x 2.5-inch or 4 x 3.5-inch HDD/SSD
Network Interface	2 x 1 GbE onboard, optional 10 GbE