Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Guide

System configurator and order-information guide
PRIMERGY RX200 S8 Status 30-01-2014
F
1R
2R
4R
8R
na na na na
Minimum one memory module or order code per CPU = first memory
Unbuffered Memory (UDIMM) no SDDC (chipkill) support
- one DDR3 unbuffered ECC mem. Module, 1.35V
Choose up to 8 order codes per CPU
8GB (1x8GB) 2Rx8 L DDR3-1600 U ECC S26361-F3807-E515
special release only
Registered Memory (RDIMM) with SDDC (chipkill) support
- one DDR3 registered ECC mem. Module, 1.35V
Note 1)
1333MHz supported with up to 2DPC (8 modules/CPU) and 1.35V
Max. DDR3 memory speed depends on the memory configuration
1600MHz supported with up to 2DPC (8 modules/CPU) and 1.5V (No of mem modules per channel) as well as on the CPU type.
Choose up to 12 order codes per CPU The memory channel with the lowest speed defines the speed
4GB (1x4GB) 1Rx4 L DDR3-1600 R ECC S26361-F3781-E514
of all CPU channels in the system, also for the channels of the
8GB (1x8GB) 1Rx4 L DDR3-1600 R ECC S26361-F3781-E515 second CPU if configured.
16GB (1x16GB) 2Rx4 L DDR3-1600 R ECC S26361-F3781-E516 For real memory speed (depending on memory type / population),
8/12x per Registered Memory (RDIMM) with SDDC (chipkill) support please check the spreadsheet "Memory speed" below
CPU, max. - one DDR3 registered ECC mem. Module, 1.5V
2/3 modules 1866MHz supported with up to 2DPC (8 modules/CPU)
per channel Choose up to 12 order codes per CPU
16GB (1x16GB) 2Rx4 DDR3-1866 R ECC S26361-F3793-E516 as soon as available
Registered Memory (RDIMM) no SDDC (chipkill) support
Note 2)
- one DDR3 registered ECC mem. Module, 1.5V Mix of memory modules is only possible within the same group
No mix with any other types of memory modules possible
1866MHz supported with up to 2DPC (8 modules/CPU)
Choose up to 12 order codes per CPU
8GB (1x8GB) 2Rx8 DDR3-1866 R ECC S26361-F3793-E515
Load Reduced Memory (LRDIMM) with SDDC (chipkill) support
- one DDR3 load reduced ECC mem. Module, 1.35V
Choose up to 12 order codes per CPU
32GB (1x32GB) 4Rx4 L DDR3-1600 LR ECC
S26361-F3782-E517
64GB (1x64GB) 8Rx4 L DDR3-1333 LR ECC
S26361-F3783-E518 as soon as available
G
3DPC
20GB
44GB
80GB
160GB
8GB
16GB
1DPC
48GB
2DPC
12GB
28GB
56GB
112GB
24GB
4GB
8GB
Effective Memory capacity / Rank Sparing Mode, 1 Channel populated
4GB
8GB
8GB
16GB
32GB
RDIMM
LRDIMM
1R
2R
64GB
Fujitsu PRIMERGY Server 12 of 28

Fujitsu PRIMERGY RX200 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX200 S8
Category	Server
Language	English